2.3 First Use
Clean the oven before using for the first time. Wipe over external surfaces with a damp soft cloth. Wash
all accessories and wipe inside the oven with a solution of hot water and washing up liquid. Set the
empty oven to the maximum temperature and leave on for about 1 hour, this will remove any lingering
smells of newness.
PRELIMINARYCLEANING
3. Use of the Oven
3.1 Display description
EN 08
Cooking
duration
Cooking
end
Timer
Clock
set
Child
lock
WiFi
ON / OFF
EXTRA
The oven is switched on and off with this button.
If the oven is switched off, the display shows the clock. When
the oven is inactive, all the functions are available except the
cookingduration and end of cooking.
If the clock is not set, the oven does not work: the display
flashes, showing "12:00" and the only functioning key is
Extra.From the Extra key, the following functions can be set:
Measuresthe internaltemperature of foodduring
cooking. Insert the meat-probe into the hole on
the top of the cavity.
– Prepare the food and properly insert the meat
probe into the food. Do not preheat or start
cooking before properlyinserting the meat probe.
Probe should be inserted into the food and
receptacle while the ovenis still cool.
– Do not insert the meat probe in the frozen food.
– Do not leave the meat probe inside the oven when
it's not used: it could damage.
5
Meat-probe (depends on the oven model)
Lateral wiregrid if included.
6
Lateral wire grids
To Next Page
Loading...
Need help?
General
