1
2
3
1.
2.
3.
4.
5.
6.
7.
2.3.4. Lock the hinges,remove the screws and removethe upper metalcover by pulling it upwards.
7. Atthe end of cleaning or substitution,reassemble the parts in reverseorder.
On all glass, the indication "Pyro" must be legible and positioned on the left side of the door, close to the
left-hand lateralhinge. In this way, the printed label of the firstglass will be inside the door.
REMOVAL AND CLEANINGOF THE GLASS DOOR
1. Open the ovendoor.
5.6. Remove the glass, carefully extracting it from the oven door (NB: in pyrolytic ovens, also remove
the second and third glass (if present)).
EN 15
To Next Page
Loading...
Need help?
General
