Changing the Dust Bag (continued)
Motor Filter Replacement
4. Remove the dust bag when it is full and replace with a new one.
5. Replace the bracket and dust bag assembly.
6. Gently close the cover, you will hear it click closed.
Maintenance (continued)
WARNING! Ensure the cleaner is not connected to the power supply when
performing any maintenance procedure.
• The inlet filter should be cleaned at least twice a year or when it
becomes visibly dirty.
• Always operate the cleaner with all clean filters installed.
Otherwise, suction power is reduced or motor damage may
be result.
• Do not use a washing machine to wash the inlet filter.
• Do not use hair drier to dry clean the filter.
1. Pull out the filter bracket assembly.
• Separate the filter from the bracket assembly.
• Replace with a new filter and reinstall the filter bracket back
in the vacuum.
To Next Page
Loading...
Need help?
General
