Hoover MPWR 40V CH93619 - Assembling Wand and Tools; Wand Assembly Procedure; Attaching Floor Tools

8
Assembling Wand & Attaching The Tools
1
Align the small silver
button on the lower
wand with the small
opening on the upper
wand.
4
To use the oor tools,
loosen the cuff on the
lower wand by twisting
counterclockwise
without removing the
cuff completely. Insert
the oor tool into the
cuff and align the metal
ring with the groove in
the tool. Tighten cuff
by twisting clockwise.
2
Insert lower wand into
upper wand until small
button clicks into the
small opening.
3
Firmly push hose end
over the open end of
the upper wand past
the raised ring.
CAUTION: NOT TO BE USED FOR GROOMING A PET. FULLY ASSEMBLE PRODUCT PRIOR TO USE.