l Do not continue to use this
machine if it appears to be faulty.
l The tumble dryer is not to be
used if industrial chemicals
have been used for cleaning.
l
Lint and fluff must not be allowed
to collect on the floor around the
outside of the machine.
l Always remove the plug before
cleaning the appliance.
l The drum inside may be very
hot. Always allow the dryer to
complete the cool down period
before removing the laundry.
l The final part of a tumble dryer
cycle occurs without heat (cool
down cycle) to ensure that the
items are left at a temperature
that ensures that the items will
not be damaged.
l Do not install the product in a
low temperature room or in a
room where there is a risk of
frost occurring. At temperature
around freezing point the
product may not be able to
operate properly: there is a risk
of damage if the water is
allowed to freeze in the
hydraulic circuit (valves, hoses,
pumps). For a better product
performance the ambient room
temperature must be between
5-35°C. Please note that
operating in cold condition
(between +2 and +5°C) might
simply some water condensation
and water drops on floor.
To Next Page
Loading...
Need help?
General