Hoover SMARTWASH+ - How to Remove and Clean Nozzle

15
To prevent possible
leaking, remove and
empty Clean Water Tank,
Dirty Water Tank and
1
2
With handle in upright
position, lift up on the
Nozzle release then
pull Nozzle forward to
remove from carpet
cleaner.
CAUTION, pull Nozzle
carefully outwards and
not upwards.
Rinse debris from
Nozzle.
3
Slide Nozzle forward to
snap into position.
5
Maintenance
How to Remove and Clean Nozzle
4
Position Nozzle onto
foot, making sure to
align the tabs at the
top of the Nozzle with
the notches inside
the foot.
IMPORTANT
The Nozzle must be in the proper position
for the cleaner to have proper suction.
! !
WARNING
Risk of personal injury – Brush roll may suddenly
restart – unplug before cleaning or servicing.
! !