Control panel and indicator lights
Programme Selector – Select the required programme
On/Off button and indicator – Press to switch on, the indicator will light
Delay Start – Allows the user to delay the start of the drying cycle (see details of Operation on page 16)
Start/Pause – Press Start/Pause to commence the selected drying programme
Acrylic/Synthetic button – Press to reduce the heat level for delicate items, the indicator above the
button will light up. To change the heat setting the programme must be reset
Low Heat – Indicator light ON
High Heat – Indicator light OFF
Empty Water indicator – lights when the water container is full
Filter Care indicator – lights when the filter needs cleaning
Progress display
START – When the dryer is switched On the START indicator will flash, when the programme starts the
START indicator will light up
60' – Indicator lights when there is less than 60 minutes left until completion of the programme
15' - Indicator lights when there is less than 15 minutes left until completion of the programme. At this
stage of the drying cycle the machine enters the Cool Down phase
STOP - Indicator lights when the programme is finished.
11
Controls and indicators
ACRYLIC/
SYNTHETIC
BUTTON
ON/OFF
BUTTON
FILTER CARE
INDICATOR
EMPTY WATER
INDICATOR
START/PAUSE
BUTTON
PROGRESS
DISPLAY
DELAY START
BUTTON
PROGRAMME
SELECTOR
To Next Page
Loading...
Need help?
General