EasyManua.ls Logo

Hoover VisionHF - Cleaning and Routine Maintenance; Dryer Cleaning Procedures; Technical Specifications

Hoover VisionHF
43 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cleaning the dryer
Clean the filter and empty the water container after every
drying cycle.
Regularly clean the condenser.
After each period of use, wipe the inside of the drum and
leave the door open for a while to allow circulation of air
to dry it.
Wipe the outside of the machine and the door with a soft
cloth.
DO NOT use abrasive pads or cleaning agents.
To prevent the door sticking or the build up of fluff
periodically clean the inner door and gasket with a damp
cloth.
Technical specifications
Drum capacity 115 litres
Maximum load 9 kg
Height 85cm
Width 60cm
Depth 60cm
Energy Label Band B
Test specification
Ref. EN 61121 - Directive 95/13 CEE
Programme Cupboard Dry
Load 9 kg
Install and use discharge kit to evacuate the condensed water.
17
Cleaning and Routine Maintenance
IMPORTANT
Always switch off and
remove the plug from
the electricity supply
before cleaning this
appliance.
For electrical data
refer to the rating
label on the front of
the dryer cabinet
(with the door open).
40005181.qxd 19/07/2007 12:36 Page 17

Table of Contents

Related product manuals