Horizon Fitness Excel 207 User Manual (English)

Questions and Answers:

B
Brittany LopezAug 10, 2025
What to do if the Horizon Fitness Elliptical Trainer console does not light up?
- H
  Heather MartinezAug 10, 2025
  First, ensure the outlet the machine is plugged into is functional and the breaker hasn't tripped. Verify that you're using the correct adapter provided or authorized by Horizon Fitness, and that it's not pinched or damaged, and is properly plugged into both the outlet and the machine. Also, check that the power switch is in the ON position (if applicable). If these steps don't work, turn off the machine, unplug the power cord, remove the console, and check that all connections to the console are secure and undamaged.
C
Cindy WebbAug 15, 2025
How to fix a squeaking or chirping noise in my Horizon Fitness Elliptical Trainer?
- A
  Ashlee DavisAug 15, 2025
  First, make sure your elliptical is on a level surface. If the noise persists, loosen all bolts attached during assembly, grease the threads, and then tighten them again.
M
maryriversAug 20, 2025
Why are the resistance levels incorrect on my Horizon Fitness Elliptical Trainer?
- R
  raymondandersonAug 20, 2025
  Ensure you are using the correct adapter provided or authorized by Horizon Fitness. Then, reset the console and allow the resistance to reset to the default position. Restart the elliptical and retry the resistance levels.
M
morenoerikAug 25, 2025
What to do if there is no heart rate reading on my Horizon Fitness Elliptical Trainer?
- D
  David DeanAug 26, 2025
  Remove the console and check that the heart rate cables are properly attached, ensuring they are securely inserted into the console. Also, check your exercise environment for potential sources of interference such as high power lines or large motors.
D
David DixonAug 29, 2025
Why does the Horizon Fitness Elliptical Trainer console light up, but the Time/RPMs do not count?
- A
  Ashley WalkerAug 30, 2025
  Turn off the machine and unplug the power cord. Remove the console and check that all connections to the console are secure and not damaged or pinched. This issue may be caused by a dislodged or damaged speed sensor or magnet.
D
Daniel BrooksSep 4, 2025
Why is my Horizon Fitness Elliptical Trainer leaving particles from the roller wheels on the guide rails?
- N
  nicholas12Sep 4, 2025
  This is considered normal wear of the elliptical wheels. To remove the particles, simply wipe off the roller wheels and guide rails with a damp cloth.