To Next PageTo Next PageHow to fix inconsistent control response on Horizon Hobby Toy helicopter?
To address inconsistent control response or the need for extra trim on your Horizon Hobby Toy helicopter, disconnect the flight battery. Then, center the control trim and re-initialize the helicopter. This may be due to improper initialization or vibration interfering with sensor operation.
What to do if LED flashes rapidly and Horizon Hobby BLADE Infusion 120 Toy aircraft won't respond during binding?
If the LED on the receiver flashes rapidly and the Horizon Hobby Toy aircraft doesn't respond to the transmitter during binding, try these steps: First, power off the transmitter and move it further away from the aircraft. Next, disconnect and reconnect the flight battery to the aircraft, then follow the binding instructions again. Ensure the bind switch or button is held while the transmitter is powered on. Also, make sure the aircraft and transmitter aren't too close to large metal objects, wireless sources, or another transmitter. Move them to a different location and attempt binding again.
Why Horizon Hobby BLADE Infusion 120 helicopter won't respond to throttle?
If your Horizon Hobby Toy helicopter doesn't respond to the throttle, it might be because the throttle is too high or the throttle trim is too high. To fix this, disconnect the flight battery, place the throttle stick in the lowest position, and move the throttle trim to the center position. Then, connect the flight battery and allow the model to initialize. Another cause might be that the helicopter moved during initialization. In this case, disconnect the flight battery and re-initialize the helicopter, making sure it remains still.
How to stop Horizon Hobby BLADE Infusion 120 Toy helicopter from vibrating in flight?
If your Horizon Hobby Toy helicopter vibrates or shakes during flight, inspect the main rotor blades and blade grips for cracks or chips. Replace any damaged parts and replace any bent spindle.
Why my Horizon Hobby Toy helicopter has random movements in flight?
If your Horizon Hobby Toy helicopter exhibits random movements in flight, verify the receiver is properly attached to the helicopter and inspect the mounting tape for damage. Make sure no wires are contacting the receiver. Inspect and balance all rotating components. Verify the main shaft and tail rotor adapter are not damaged or bent. Inspect mechanics for broken or damaged parts and replace as necessary.
Why does Horizon Hobby BLADE Infusion 120 helicopter have reduced flight time?
If your Horizon Hobby Toy helicopter has reduced flight time or seems underpowered, first ensure the flight battery is fully recharged. If the issue persists, the flight battery might be damaged and need replacement, following the battery instructions. Also, cold flight conditions can affect performance, so ensure the battery is warm (room temperature) before use.
How to fix tail oscillation on Horizon Hobby BLADE Infusion 120 Toy helicopter?
If your Horizon Hobby Toy exhibits tail oscillation, wag, or poor performance, verify that the boom support bolts are tight and the plastic boom support ends are properly adhered to the boom support rods. Inspect the tail rotor for damage and ensure that all bolts on the tail assembly are properly tightened. Replace any damaged or worn components.
Why does Horizon Hobby Toy helicopter drift in calm winds?
If your Horizon Hobby Toy helicopter drifts in calm winds, under normal operation the transmitter trims should not require adjustment and the center positions are memorized during initialization. If you find that trim adjustments are necessary after take off, verify the balance of all rotating components, ensure the linkages are not damaged and make sure the servos are in proper working condition
What to do if Panic Recovery doesn't level Horizon Hobby BLADE Infusion 120 model?
If the Panic Recovery or Return to Level function doesn't level the Horizon Hobby Toy model, re-initialize the model on a level and still surface. Also, always ensure you lift off from a level surface.
How to reduce severe vibration in Horizon Hobby Toy?
If your Horizon Hobby Toy experiences severe vibration, try loosening the battery strap. Also, check the main shaft, tail rotor, main rotor blades, main frame and adapter for damage and replace as necessary. Minimizing vibration is crucial for the Panic Recovery and Return to Level functions to operate correctly.
General| Brand | Horizon Hobby |
|---|---|
| Model | BLADE Infusion 120 |
| Category | Toy |
| Skill Level | Intermediate |
| Battery Type | LiPo |
| Control Channels | 6 |
| Material | Plastic |
| Tail Drive | Direct Drive |
| Type | Helicopter |
| Battery | LiPo |
Verifying correct elevator response for forward and backward movement.
Verifying correct aileron response for left and right movement.
Verifying correct collective pitch response for up and down movement.
Checking main and tail rotor spin direction for proper operation.
Steps for a smooth and controlled takeoff from a level surface.
Tips for maintaining a stable hover and making positional corrections.
Action to take when LVC is activated to protect the battery.
Instructions for a safe and controlled landing.
Navigating the transmitter menu to access tuning parameters.
Steps to calibrate the helicopter for drift correction and crash repairs.
Restoring helicopter settings to factory defaults.
Accessing the servo adjustment mode for fine-tuning.
How to set the neutral position for control surface servos.
Ensuring the swashplate is level and blades are at 0 degrees pitch.
Procedure to save the servo adjustments and exit adjustment mode.
Procedure to optimize SAFE technology settings for stable flight.
Evaluating flight performance after trim and exiting trim mode.
List of recommended batteries, chargers, and adapters.
List of optional transmitters for use with the helicopter.
Information and procedures for service not covered by warranty.
