To Next Page
J
Joy RamseyAug 18, 2025
What to do if LED flashes rapidly and Horizon Hobby Toy aircraft will not bind?
- DDeborah WardAug 18, 2025
If the LED on the receiver of your Horizon Hobby Toy flashes rapidly and the aircraft won't bind to the transmitter during the binding process, consider the following: 1. Power off the transmitter and increase the distance between the transmitter and the aircraft. 2. Disconnect and reconnect the flight battery to the aircraft, then follow the binding instructions. 3. Ensure the bind switch or button was held down while powering on the transmitter. If not, power off the transmitter and repeat the binding process. 4. Move the aircraft and transmitter away from any large metal objects, wireless sources, or other transmitters, and attempt binding again.
General
