To Next PageTo Next Page
Need help?Do you have a question about the Horizon Hobby Vibe 500e and is the answer not in the manual?
General| Brand | Horizon Hobby |
|---|---|
| Model | Vibe 500e |
| Category | Toy |
| Language | English |
Important instructions and warnings before beginning helicopter assembly.
Lists all necessary parts and tools for helicopter assembly.
Steps for preparing the radio transmitter.
Explanation of the 120-degree 3-servo CCPM swashplate mixing system.
Importance of setting similar travel values for CCPM servos.
Importance of setting correct servo reversing directions for CCPM.
Guidance on connecting servos for CCPM.
Requirements for the radio system to use CCPM.
Lists compatible JR and Spektrum radio systems for CCPM.
Selecting the correct device and gyro setting.
Procedure to select and reset the model for programming.
Activating the CCPM function on DX7se/DX7.
Setting Dual Rate and Expo values.
Setting servo reversing for DX7se/DX7.
Adjusting travel values for DX7se/DX7.
Configuring CCPM settings on DX7se/DX7.
Configuring the throttle hold function.
Performing initial settings on the radio system.
Adjusting and fine-tuning servo neutral positions.
Steps for balancing the main rotor blades.
Centering servos and swashplate using sub-trim.
Adjusting pitch-to-aileron mixing via travel adjust.
Adjusting pitch-to-elevator mixing via travel adjust.
Configuring tail rotor servo direction and limits.
Verifying servo direction and adjusting sub-trim.
Adjusting pitch and throttle curves for performance.
Defining pitch and throttle curves for flight modes.
Comprehensive preflight inspection checklist.
Adjusting main rotor blade tracking for stability.
Essential safety guidelines and practices for pilots.
General safety warnings and operational advice.
