TR10A108-B RE / 02.2013
3
1 About These Instructions ....................................... 4
1.1 Further applicable documents .................................. 4
1.2 Warnings used .......................................................... 4
1.3 Definitions used ........................................................ 4
1.4 Symbols used ........................................................... 4
1.5 Abbreviations used ................................................... 5
2
Safety Instructions ........................................... 5
2.1 Intended use ............................................................. 5
2.2 Non-intended use ..................................................... 5
2.3 Fitter qualification ..................................................... 5
2.4 Safety instructions for fitting, maintenance,
repairs and disassembly of the door system ............ 5
2.5 Safety instructions for fitting ..................................... 6
2.6 Safety instructions for initial
start-up and for operation ......................................... 6
2.7 Safety instructions for using
the hand transmitter.................................................. 6
2.8 Approved safety equipment...................................... 6
3 Fitting ....................................................................... 7
3.1 Inspect door/door system ........................................ 7
3.2 Clearance required.................................................... 7
3.3 Fitting the garage door operator ............................... 7
3.4 Fitting the boom ...................................................... 16
3.5 Determining the end-of-travel positions ................. 21
3.6 Fixing the warning sign ........................................... 23
4 Electrical connection ............................................ 24
4.1 Connecting terminals .............................................. 24
4.2 Connecting additional
components / accessories ...................................... 24
5 Initial start-up ........................................................ 28
6 Menus .................................................................... 30
6.1 Menu description .................................................... 31
7 Teaching in the operator ...................................... 35
8 Hand transmitter HS 5 BiSecur ........................... 35
8.1 Description of the hand transmitter ........................ 36
8.2 Inserting / changing the battery ............................... 36
8.3 Hand transmitter operation ..................................... 36
8.4 Inheriting / transmitting a radio code ....................... 36
8.5 Querying the door position ..................................... 36
8.6 Hand transmitter reset ............................................ 37
8.7 LED display ............................................................. 37
8.8 Cleaning the hand transmitter ................................ 37
8.9 Disposal .................................................................. 37
8.10 Technical data ......................................................... 37
8.11 Excerpt from the declaration
of conformity for the hand transmitter .................... 37
Contents
A Articles supplied ..................................................... 2
B Tools needed for fitting .......................................... 2
Dissemination as well as duplication of this document and the
use and communication of its content are prohibited unless
explicitly permitted. Non-compliance will result in damage
compensation obligations. All rights reserved in the event of
patent, utility model or design model registration. Subject to
changes.
9 External radio receiver ......................................... 37
9.1 Teaching in hand transmitter buttons ..................... 38
9.2 Excerpt from the declaration
of conformity for the receiver .................................. 38
10 Operation ............................................................... 38
10.1 Instructing users ..................................................... 38
10.2 Function check ....................................................... 39
10.3 Functions of various radio codes ........................... 39
10.4 Garage door operator behaviour after
two consecutive high-speed Open runs ................. 39
10.5 Behaviour during a power failure
(without an emergency battery) .............................. 39
10.6 Behaviour after the power returns
(without emergency battery) ................................... 39
10.7 Reference run ......................................................... 39
11 Inspection and Maintenance ............................... 39
11.1 Tension of the toothed belt ..................................... 40
11.2 Replacement bulb ................................................... 40
12 Factory reset ......................................................... 40
13 Dismantling and Disposal .................................... 41
14 Warranty Conditions ............................................. 41
15 Excerpt from the Declaration
of Incorporation .................................................... 41
16 Technical Data ....................................................... 42
17 Display of Errors / Warnings
and Operating Conditions .................................... 43
17.1 Display of errors and warnings ............................... 43
17.2 Display of Operating Conditions ............................. 44
18 Menu and programming overview ...................... 44
ENGLISH
To Next Page
Loading...