To Next PageTo Next Page
Need help?Do you have a question about the HORNER HE-XT105 and is the answer not in the manual?
Details safety warnings and guidelines using symbols.
Information on grounding specifications and panel grounding.
Explains device connectivity options for the XLE/XLT.
Details on panel or DIN rail mounting procedures for XLE/XLT.
Details the pins and power-up sequence for the primary power port.
Expanding I/O economically by connecting network I/O devices.
Step-by-step guide to configuring the Ethernet module in Cscape.
Configuring IP address, Net Mask, and Gateway for the Ethernet module.
How to load and save application programs using removable media.
Table detailing the built-in digital and analog I/O for different models.
Details digital inputs, their low voltage DC design, and positive/negative logic modes.
How analog inputs measure voltage or current, and digital filtering options.
Describes the flexible interface for universal analog inputs.
Explains the four modes of HSC operation: Frequency, Count, Pulse width, Quadrature.
Details the operation of PWM functions, parameters, and formulas.
How to establish communication with the XLE/XLT via various methods.
Overview of configuring the XLE/XLT hardware and I/O modules.
Configuring digital and high-speed counter inputs.
Configuring digital and PWM outputs, including controller stop behavior.
Setting up analog input modes and filtering for different models.
Using the Advanced Math Scaling function for analog input conversion.
Procedure for updating the product's firmware.
Mechanisms for specifying data to read/write from slaves as a Modbus master.
Tables for Modbus addressing references for XLE/XLT units.
Information on establishing and troubleshooting connections with the controller.
Information and troubleshooting checklist for setting up a CsCAN network.
General| Brand | HORNER |
|---|---|
| Model | HE-XT105 |
| Category | Controller |
| Language | English |
