Instruction Manual
Microprocessor Temperature Regulator HT MC11
Page 12 of 22
C u . C y
Current cycle time
Adjustment range: 2 … 200 s <5>
Cycle time of heating current measurements
F i . t i
Filter time
Adjustment range: OFF ; 0.1 … 10.0 s
If the process is not stable, filter time can be set to reduce fluc-
tuations of the process display.
The controlling process is not influenced.
C o . c 1
Configuration external con-
tact 1
Lo c
Ext. contact closed, LOC parameter not adjustable
S P 2
Ext. contact closed, setpoint 2 is active
Pr . S t
Close ext. contact: start program controller,
Open ext. contact: stops program controller
C L. S H
Close ext. contact: release self hold of temperature
monitoring (CLear Self Hold)
L0 C
Adjustment lock
OFF
No adjustment lock
P C
Parameter and configuration levels locked
n.S P 1
all parameters except setpoint 1 locked (not SP1)
AL L
all parameters locked
Ad r
Adjustment range: 1 … 255
LU
m
I
Luminance
Luminance adjustment of 7-segment-display
Adjustment range: 0...6
1 0 8 0 Hr . 0 1
Device code and version
Version 1080/1.03 02/2018
471 10 1400
To Next Page
Loading...