Horstmann ChannelPlus H37XL Series 2 User Manual

11
Adjusting Channel Headings
The programmer has been preset to display the channel heading
as ‘Heating and Hot Water’, should you require either the ‘Zone’
or ‘Channel’ options then please follow
the owchart opposite.
General Information
RESETTING THE CHANNELPLUS H37XL SERIES 2
Electronic equipment can in some circumstances be affected by electrical interference.
If the display becomes frozen or scrambled; or if you wish to revert back to the default
settings please use the following procedure:
RESET PROCEDURE
PLEASE NOTE: Using this procedure will restore the ChannelPlus to the original factory
programme settings, the time setting will remain correct.
Press the green
‘SET’ button
Use the ‘+’ and ‘-’
buttons to adjust
‘HEADINGS’
Use the ‘+’ and ‘-’
buttons to adjust
HEATING/WATER
ZONES OR CHANNELS
Use the ‘+’ and ‘-’
buttons to select
‘SET DEFAULTS’
Open cover
Press ‘ENTER’
Press ‘ENTER’
Press ‘ENTER’






Press the green
‘SET’ button
Press the green
‘SET’ button
Close cover
ADVANCE
SELECT
BOOST



SAMPLE DISPLAYS
SET DEFAULTS
TIME AND DATE
CLOCK OPTIONS
HEADINGS
HEADINGS
HEATING/WATER
ZONES
CHANNELS
HEADINGS
HEATING/WATER
Lower the front ap of the unit. On the right
hand Channel press the ADVANCE (Enter)
and SELECT (Blue) buttons together, then
release and the programmer will return to
the preset factory settings.


RESET
SET HEATING 1
SET HEATING 2
SET WATER
SET HOLIDAY MODE
SET DEFAULTS
SET DEFAULTS

Horstmann ChannelPlus H37XL Series 2 Specifications

General

Category	Thermostat
Display	LCD
Battery Backup	Yes
Mounting	Wall-mounted
Number of Channels	3
Override Function	Yes
Boost Function	Yes
Holiday Mode	Yes
Control Type	Digital
Temperature Range	5°C to 30°C
Model	ChannelPlus H37XL Series 2
Type	Programmable thermostat
Programming	7-day programming
Power Supply	230V AC
Compatibility	Central heating systems