Horstmann ChannelPlus H37XL Series 2 User Manual

8
Adjusting Default Settings
The ChannelPlus H37XL Series 2 has a number of default settings which are normally
installed. These settings are designed to reduce the need for user intervention upon
installation of the programmer. However it is possible to customise the user display by
following the procedures in the following pages. The factory default normally installed are
illustrated below;
Time and Date
Options
Clock Options
Options
Headings
Options
Time and calendar
are factory set
The programmer has
been set with the current
time and date during
manufacture.
No alteration should be
required to the time and
date. However, if any
modication is required
please refer to the
owchart on page 9
Time displayed in
24hr clock format
24 hour
or
AM/PM
Channel heading set to
standard installation
i.e. Heating 1, Heating 2
and Hot Water
Heating/Water
Zones
Channels
  
 

22.42

Horstmann ChannelPlus H37XL Series 2 Specifications

General

Category	Thermostat
Display	LCD
Battery Backup	Yes
Mounting	Wall-mounted
Number of Channels	3
Override Function	Yes
Boost Function	Yes
Holiday Mode	Yes
Control Type	Digital
Temperature Range	5°C to 30°C
Model	ChannelPlus H37XL Series 2
Type	Programmable thermostat
Programming	7-day programming
Power Supply	230V AC
Compatibility	Central heating systems