E
erojasSep 6, 2025
Why does my Hotpoint Ariston Dishwasher leave streaks on glasses?
- RRichard SimmonsSep 6, 2025
If your Hotpoint Ariston Dishwasher leaves streaks or a bluish tinge on dishes and glasses, the rinse aid dosage might be too high.
To Next PageTo Next PageWhy does my Hotpoint Ariston Dishwasher leave streaks on glasses?
If your Hotpoint Ariston Dishwasher leaves streaks or a bluish tinge on dishes and glasses, the rinse aid dosage might be too high.
What to do for Hotpoint Ariston LST 328 Dishwasher water inlet hose alarm?
To address a water inlet hose alarm or blocked water inlet filter on your Hotpoint Ariston Dishwasher: * Switch off the appliance using the ON/OFF button. * Shut off the water tap to prevent flooding and remove the plug from the electrical socket. * Check the water inlet filter for blockages.
Why is my Hotpoint Ariston Dishwasher making excessive noise?
If your Hotpoint Ariston dishwasher is making excessive noise, it could be due to dishes rattling against each other or the sprayer arms. Another possible cause is excessive foam production, which can happen if the detergent wasn't measured correctly or isn't suitable for dishwashers.
What does it mean when Hotpoint Ariston LST 328 displays water inlet hose alarm?
If your Hotpoint Ariston dishwasher displays the water inlet hose alarm (ON/OFF indicator light flashes and the number 7 appears on the display), immediately switch off the appliance using the ON/OFF button. Then, shut off the water tap to prevent flooding and unplug the dishwasher from the electrical socket. Check the water inlet filter for blockages from impurities.
Why are there white film on dishes from Hotpoint Ariston LST 328 Dishwasher?
If your dishes and glasses are covered in a white film or limescale deposits after using your Hotpoint Ariston dishwasher, it could be due to a few reasons: * The level of refined salt is low, or the dosage setting isn't suited to the water hardness. * The lid on the salt dispenser isn't closed properly. * The rinse aid has been used up, or the dosage is too low.
Why do dishes have bluish tinge from Hotpoint Ariston LST 328?
If your dishes and glasses have streaks or a bluish tinge after being washed in your Hotpoint Ariston dishwasher, the rinse aid dosage might be too high.
General| Type | Built-In |
|---|---|
| Energy Efficiency Class | A |
| Noise Level | 49 dB |
| Washing Class | A |
| Drying Class | A |
| Number of Programs | 5 |
| Energy Rating | A |
| Delay Start | Yes |
| Half Load Option | Yes |
| Water Consumption | 13 L |
Guide on placing and stabilizing the dishwasher on a level surface.
Instructions for connecting water and electrical power safely.
Details on attaching the water inlet hose to cold or hot water points.
Steps for connecting the water outlet hose to a drain.
Ensuring the socket is earthed and compatible with the appliance plug.
Step-by-step guide to turn on and initiate a wash cycle.
Guidance on using the correct amount of detergent for effective washing.
How to fill the rinse aid dispenser for better drying.
Adjusting the water softener based on local water hardness.
Important safety instructions for operating the appliance.
Solutions for issues where the appliance won't power on or respond.
Troubleshooting for issues with water not being expelled from the machine.
Solutions for crockery that remains dirty after a wash cycle.
How to resolve issues related to water intake alarms.
Troubleshooting steps for water inlet filter blockage alarms.
