Hotpoint LTF 8B019 User Manual

Hotpoint LTF 8B019

20 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

English, 1

GB

LTF 8B019

Contents

Product Fiche, 2

Precautions and safety advice, 3-4

General safety

Disposal of old electrical appliances

Saving energy and respecting the environment

Recycling & Disposal Information

Installation, 5-6-7

Positioning and levelling

Connecting the electricity and water supplies

Technical data

Advice regarding the first wash cycle

Description of the appliance, 8

Overall view

Control panel

Loading the racks, 9-10

Lower rack

Cutlery basket

Upper rack

Adjusting the upper rack

Unsuitable crockery

Damage to glass and crockery

Start-up and use, 11

Starting the dishwasher

Measuring out the detergent

Wash cycles, 12

Table of wash cycles

Special wash cycles and Options, 13

Rinse aid and refined salt, 14

Measuring out the rinse aid

Setting water hardness

Measuring out the refined salt

Care and maintenance, 15

Cutting off the water and electricity supplies

Cleaning the dishwasher

Preventing unpleasant odours

Cleaning the sprayer arms

Cleaning the water inlet filter

Cleaning the filters

Leaving the machine unused for extended periods

Troubleshooting, 16

After-Sales Service, 17

Guarantee, 18

Instructions for use

DISHWASHER

Table of Contents

Questions and Answers:

P
pnguyenSep 6, 2025
What to do if Hotpoint LTF 8B019 Dishwasher won’t load any water and is blocked with flashing lights?
- J
  Jennifer RodriguezSep 6, 2025
  If your Hotpoint dishwasher won’t load any water and shows flashing lights, it could be due to several reasons. First, ensure that there is water in the mains supply and that the tap is open. Check if the water inlet hose is bent. Also, the filters or the drain duct might be clogged and need cleaning. After checking and cleaning, switch the dishwasher on and off and start a new wash cycle. If the problem persists, turn off the water tap, remove the plug and call the Service Centre.
C
Christina Gonzalez DVMAug 25, 2025
What to do if my Hotpoint LTF 8B019 does not start?
- H
  hgriffinAug 25, 2025
  If your dishwasher isn't starting, try these steps: First, turn the dishwasher off and on using the ON/OFF button, waiting about a minute before turning it back on and resetting the program. Make sure the appliance is correctly plugged into the power outlet. Ensure that the dishwasher door is fully closed.
J
Joshua FletcherAug 25, 2025
What to do if no water drains out from my Hotpoint LTF 8B019 Dishwasher?
- S
  Steven RiosAug 26, 2025
  If water isn't draining from your dishwasher, it could be due to several reasons. First, check if the dishwasher cycle has fully completed. Inspect the water inlet hose to ensure it's not bent. Also, verify that the drain duct isn't blocked and that the filter isn't clogged with food residues.
H
hbookerAug 26, 2025
Why is crockery not drying properly in my Hotpoint LTF 8B019 Dishwasher?
- S
  Sandra GoodmanAug 27, 2025
  If your crockery isn't drying properly, it could be because you've selected a wash cycle without a drying program. Check if the rinse aid has been used up or the dosage is too low, and ensure the rinse aid dispenser setting is high enough. Also, keep in mind that crockery made from non-stick material or plastic may not dry as effectively.
F
fwilliamsAug 27, 2025
Why my Hotpoint Dishwasher does not start?
- L
  lopezaliciaAug 27, 2025
  If your Hotpoint dishwasher does not start or cannot be controlled, there are several possible reasons. First, ensure that the water supply tap is turned on. Then, switch off the appliance by pressing the ON/OFF button, wait approximately one minute, and switch it back on to reset the wash cycle. Also, make sure the appliance is properly plugged in or try another electricity socket. Finally, ensure that the dishwasher door is fully closed.
L
Lauren HowardSep 14, 2025
What to do if the door won’t close on my Hotpoint Dishwasher?
- D
  djonesSep 14, 2025
  If the door on your dishwasher won’t close, it could be that the lock was released. Try pushing the door firmly until you hear a “clacking” noise.
D
daniellebennettSep 12, 2025
Why does my Hotpoint Dishwasher make excessive noise?
- N
  Nancy JonesSep 12, 2025
  Excessive noise from your dishwasher can be caused by dishes rattling against each other or the sprayer arms. Also, check for excessive foam, which may indicate that the detergent hasn't been measured out correctly or isn't suitable for dishwashers.
S
steven54Sep 13, 2025
Why do dishes have bluish tinge in my Hotpoint LTF 8B019?
- C
  Candace ParkerSep 13, 2025
  Streaks or a bluish tinge on your dishes and glasses usually indicates that the rinse aid dosage is too high.
P
paulaalexanderSep 4, 2025
What to do if Hotpoint LTF 8B019 Dishwasher doesn't take water in and shows alarm?
- H
  Hunter MarshallSep 4, 2025
  If your dishwasher isn't taking in water and the tap shut-off alarm is activated, there might be a few issues. Check if there's water in the mains supply and ensure the water inlet hose isn't bent. Turn on the tap; the appliance should start after a few minutes. If beeps sounded and no action was taken, the appliance lock may have activated. Turn the machine off and on, turn on the tap, and reprogram the appliance to restart the wash cycle.
T
Tammie WolfeSep 2, 2025
How to close the door of Hotpoint Dishwasher?
- M
  Mrs. Lacey NelsonSep 2, 2025
  If your Hotpoint dishwasher's door won't close, the lock may have been released. Push the door firmly until you hear a 'clacking' noise.

Hotpoint LTF 8B019 Specifications

General

Type	Freestanding
Energy Efficiency Class	A+
Number of Place Settings	13
Noise Level	49 dB
Number of Programs	8
Dimensions (H x W x D)	85 x 60 x 60 cm
Control Panel Colour	Black
Drying System	Static
Washing Class	A
Drying Class	A
Energy Consumption per Cycle	1.04 kWh
Delay Start	Yes
Cycle Time	190 minutes
Water Consumption per Cycle	11 L

Summary

Product Fiche

Precautions and Safety Advice

General Safety

Safety rules for operating the appliance, including for children.

Disposal of Old Electrical Appliances

Guidelines for environmentally friendly disposal of old units.

Saving Energy and Respecting the Environment

Tips for efficient operation and environmental care.

Recycling & Disposal Information

Installation

Positioning and Levelling

Instructions for placing and stabilizing the dishwasher.

Electrical Connection

Guidance on safely connecting the appliance to the power supply.

Connecting the Water Supplies

Procedures for connecting the appliance to water sources.

Sink Waste System

How to connect the water outlet hose to the drain.

Advice Regarding the First Wash Cycle

Description of the Appliance

Overall View

Diagram and labels of the dishwasher's main components.

Control Panel

Explanation of buttons, indicators, and display functions.

Loading the Racks

Loading Tips and Rack Details

General advice, lower rack, cutlery basket, and upper rack loading.

Rack Adjustments and Crockery Types

Tip-Up Compartments & Cutlery Tray

Adjusting rack compartments and using the cutlery tray.

Upper Rack Height and Unsuitable Crockery

Adjusting upper rack height and identifying unsuitable items.

Damage to Glass and Crockery

Factors causing damage and tips for prevention.

Start-Up and Use

Starting the Dishwasher

Step-by-step guide to begin a wash cycle.

Detergent Measurement and Cycle Management

Dosing detergent, modifying cycles, adding items, and handling interruptions.

Wash Cycles

Special Wash Cycles and Options

Wash Options Overview

Explanation of available additional functions.

Delayed Start Function

How to set a timed delay for the start of a wash cycle.

Rinse Aid and Refined Salt

Rinse Aid Management

Measuring, adjusting, and the function of rinse aid.

Water Hardness and Salt Measurement

Setting water hardness and filling the salt dispenser.

Care and Maintenance

Essential Maintenance Procedures

Shutting off supplies, cleaning the appliance, and preventing odors.

Component Cleaning

Cleaning sprayer arms, water inlet filter, and main filter assembly.

Long-Term Storage

Steps for preparing the dishwasher for extended periods of inactivity.

Troubleshooting Common Issues

Appliance Not Starting or Controlling

Solutions for appliance not starting or responding.

Door Closure and Drainage Problems

Troubleshooting steps for door latching and water drainage.

Noise, Film, and Streaking Issues

Solutions for excessive noise, white film, or streaking on dishes.

Drying, Cleaning, and Water Intake Problems

Solutions for poor drying, unclean dishes, or water intake alarms.

After-Sales Service and Support

Essential Contact Information

Key contact details for Hotpoint service and support.

Appliance Registration and Parts

Information on registering the appliance and purchasing parts.

Guarantee and Extended Services

Standard and Extended Guarantees

Details of the 12-month warranty and 5-year parts guarantee.

Additional Protection and Helpdesk

Options for extended guarantees and free initial support.

Related product manuals

Hotpoint LTF 8M121

Preview: Hotpoint LTF 11M132

Hotpoint LTF 11M132

Hotpoint LFF 8B019

Preview: Hotpoint LTB 4M116

Hotpoint LTB 4M116

Preview: Hotpoint LTB 4B019

Hotpoint LTB 4B019

Hotpoint LTB 4B019 EU

Preview: Hotpoint LFT 04

Hotpoint LFT 04

Preview: Hotpoint LFT 114

Hotpoint LFT 114

Preview: Hotpoint LSTB 4B00

Hotpoint LSTB 4B00

Hotpoint LFT 32147

Preview: Hotpoint LSTF 9H123

Hotpoint LSTF 9H123