Hotpoint LTF 8B019 - Special Wash Cycles and Options; Wash Options Overview; Delayed Start Function

GB
13
Special wash cycles
and Options
Notes:
Optimumperformancelevelswhenusingthe“Fast"and"Express
40’”cyclescanbeachievedbyrespectingthespecifiednumber
of place settings.
To reduce consumption, only run the dishwasher when it is full.
Note for Test Laboratories: forinformationoncomparativeEN
testing conditions, please send an email to the following address:
ASSISTENZA_EN_LVS@indesitcompany.com
Wash options
If an option is not compatible with the selected wash cycle
(see table of wash cycles), the corresponding LED flashes
rapidly 3 times and beeps will sound.
Delayed start
The start of the wash cycle may be delayed for a
period of time between 1 and 12 hours.
1. Press the DELAYED START button: the corresponding
symbol appears on the display; each time you press the
button,thetime(1h,2h,etc.uptomax.12h)fromthestart
of the selected wash cycle will be increased.
2.Selectthecycleandclosethedoor:thetimerwillbegin
counting down;
3.Oncethistimehaselapsed,theindicatorlightswitches
off and the wash cycle begins.
To adjust the delay time and select a smaller period of time,
presstheDELAYEDSTARTbutton.Tocancelit,pressthe
button repeatedly until the selected delayed start indicator
light switches off. The wash cycle will start automatically as
soon as the door is shut.