Hotpoint LTF 8M124 - Special Wash Cycles and Options

EN
29
Special wash cycles
and Options
Wash options
If an option is not compatible with the selected wash cycle
(see table of wash cycles), the corresponding LED flashes
rapidly 3 times and beeps will sound.
Delayed start Option
The start of the wash cycle may be delayed for a
period of time between 1 and 12 hours.
1.Pressthe DELAYED START button:thecorresponding
symbol appears on the display; each time you press the
button,thetime(1h,2h,etc.uptomax.12h)fromthestartof
the selected wash cycle will be increased.
2.Selectthecycleandclosethedoor:thetimerwillbegin
counting down;
3.Oncethistimehaselapsed,theindicatorlightswitchesoff
and the wash cycle begins.
To adjust the delay time and select a smaller period of time,
presstheDELAYEDSTARTbutton.Tocancelit,pressthe
button repeatedly until the selected delayed start indicator
light switches off. The wash cycle will start automatically as
soon as the door is shut.
The DELAYED START function cannot be set once a wash
cycle has been started.
Notes:
Optimumperformancelevelswhenusingthe“Fast"and"Express
”cyclescanbeachievedbyrespectingthespecifiednumber
of place settings.
To reduce consumption even further, only run the dishwasher
when it is full.
Note for Test Laboratories:
forinformationoncomparativeEN
testing conditions, please send an email to the following address:
assistenza_en_lvs@indesitcompany.com
* Only available in selected models.