10
Press time+ button,Timer keep up by unti of 1 hour .The light will flash for 3 seconds to activate the timer
you programmed.
TIME DISPLAY
In the diagram above, the letter “J” points to the adjustable time display. To adjust the time, Press FAN,
SPEED and SWING together (at the same time), then press UP to adjust the hours, and press DOWN
to adjust the minutes.
SWING
To start horizontal oscillation, press the Swing button once. ‘ ’ icon will appear on the multi-color
display. To stop oscillation, press the Swing button a gain. Vertical air flow direction can be adjusted
manually.
PURIFY
When the hepa be faxed into the unit’s filter , Unit comes into the operation mode of air purify ,press
this button to open and close the unit , “”icon keep light when “”
Keep flame ,means it’s time to change a new hepa for better operation.
NOTE: UNIT’S MODE BOTTON IS NOT AVAILABLE UNDER THE OPERATION MODE OF
AIR PURIFY, OTHER BUTTON’S FUNCTION IS THE SAME AS THE OPERATION MODE
OFAIR CONDITIONER.
To Next Page
Loading...
