Hotpoint MAC155 - Control Panel Overview

8
CONTROL PANEL
TIMER
SWING
°C/°F
SPEED
TIME+
MODE
PURIFY
POWER
This button increases the room temperature/timer hours.
Press this button to oscillate the vertical louvers or to
stop oscillation.
During the modes of cooling ,heating and fanning ,press
this button to choose high,medium or low fan speed.In
dehumidifying mode,this button is inoperable.
Press this button to turn the timer on/off.
This button decreases the room temperature/timer hours.
Press this button to select among the modes of
auto,cooling,dehumidifying,fanning or heating.
Press this button to turn the unit on or off.
FAN SPEED
Button
SWING Button
TEMP- Button
TEMP+ Button
TIMER Button
MODE Button
POWER Button
C
ONTROL PANEL
TIME+ Button
This button increases the timer hours.
°C/°F
button
press this button change the temperature display °C and
°f .
PURIFY Button
After faxing the HEPA ,Unit comes into air purify mode,Press
this button to open and close the unit.
NOTE: UNIT’S MODE BOTTON IS NOT AVAILABLE UNDER THE OPERATION MODE OF AIR PURIFY, OTHER
BUTTON’S FUNCTION IS THE SAME AS THE OPERATION MODE OF AIR CONDITIONER.