EasyManua.ls Logo

Hotpoint RB536 - Oven and Control Troubleshooting

Hotpoint RB536
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Before you call for service...
Troubleshooting Tips
Possible Causes What To Do
Oven--All Models
Ovenlight does not work Light bulb is loose or defective. Tighten or replace the bulb.
Switch operating light is broken. Call for service.
Ovenwill not work Plug on range is not completely Hake sure electrical plug isplugged into a live,properly
inserted in the electrical outlet, grounded outlet.
A fuse in your home may Replacefuse or reset circuit breaker.
be blown or the circuit
breaker tripped.
Oven controls improperly set. Seethe Usingthe oven section.
On self-cleaning models, door If necessary,allow the oven to cool then unlock the door.
left in the locked position.
Fooddoes not bake Oven controls improperly set. Seethe Usingthe oven section.
or roast properly Rack position is incorrect or the Seethe Usingtheoven section.
rack is not level.
Incorrect cookware or cookware Seethe Usingthe oven section.
of improper size being used.
Oven thermostat needs See the Adjust the oven thermostat-Easy to do yourself!
adjustment, section.
Fooddoes not Oven is not set to BROIL. On models with u temperature knob,make sureyou turn
broilproperly itall the way to the BROILposition.On models with a
BROILHI/LO pad, make sure itisturned on.
Improper reck position Seethe Broiling guide.
being used.
Food being cooked in a hot pan. Forbest results,usea pan designedfor broiling.
Hakesure it is cool.
Cookware not suited for broiling. For best results,use a pan designedfor broiling.
In some areas the power Preheatthe broil element for 10 minutes.
(voltage} may be low. Broil for the longest period of time recommended in
the Broiling guide.
Control signals after Youforgot to enter a bake Pressthe BAKEpod and desiredtemperature or the
entering cooking time temperature or cleaning time. SELFCLEANpad and desired cleantime.
or delay start
The installed connection Contact installer or electricianto correct miswire.
from the house to the unit
loud tone is miswired.
A fuse in your home may be Replacethe fuse or reset the circuit breaker.
blown or the circuit breaker
tripped.
The oven is self-cleaning. ° Wait for the self-cleancycle to finish and the oven
to cool.
Controls improperly set. ° Seethe Usingthe warming drawer section.

Other manuals for Hotpoint RB536

Related product manuals