EasyManua.ls Logo

Hotpoint RB754 - THE PROBLEM SOLVER (continued); Oven Odor and Temperature Troubleshooting; Timer and Clock Troubleshooting

Hotpoint RB754
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34
THE PROBLEM SOLVER
(continued)
PROBLEM POSSIBLE CAUSE
“BURNING” OR “OILY” • This is normal in a new oven and will disappear in time. To speed the
ODOR EMITTING process, set a self-clean cycle for a minimum of 3 hours. See the Operating
FROM OVEN WHEN the Self-Cleaning Oven section.
TURNED ON
OVEN TEMPERATURE • The oven thermostat needs adjustment. See the Adjust the Oven Thermostat—
TOO HOT OR TOO COLD Do It Yourself section.
OVEN NOT CLEAN • The oven controls are not set properly.
AFTER CLEAN CYCLE
• Heavily soiled ovens require 3
1
2
to 4-hour clean time.
• Heavy spillovers should be cleaned up before starting the clean cycle.
STRONG ODOR An odor from the insulation around the inside of the oven is normal for the
first few times the oven is used. This is temporary.
AUTOMATIC OVEN Check to be certain step by step directions were followed correctly. See
TIMERS DO NOT the Automatic Timers and Clock section.
WORK PROPERLY
CLOCK AND TIMER Check for blown fuse or tripped circuit breaker.
DO NOT WORK
If you need more help
...
call, toll free:
GE Answer Center
®
800.626.2000
consumer information service

Related product manuals