Hotpoint UH8 F2D XI 2 User Manual

227


Toguaranteeadequateventilation,leaveaspaceon
bothsidesandabovetheappliance.
The distance between the rear of the appliance and the
wallbehindtheapplianceshouldbeatleast50mm.
AreductionofthisspacewillincreasetheEnergy
consumptionofproduct.

During installing the freezer
1
and the fridge
2
together ensure that the freezer is located on the left
andthefridgeontheright(asshownonthedrawing).
Leftsideofrefrigeratorisequippedwithspecialdevice
in order to avoid condensation problems between
appliances.
We recommended installing two appliances together
usingthelinking-kit
3
(asshownonthedrawing).You
canbuyitinService.

To level the doors using the adjustable lower hinge
(selectmodels)
Iftherefrigeratordoorislowerthanthefreezerdoor,
raise the refrigerator door by turning the adjustment
screwcounterclockwiseusingaM10wrench.
Ifthefreezerdoorislowerthantherefrigeratordoor,
raise the freezer door by turning the adjustment screw
counterclockwiseusingaM10wrench.
*Availableonselectedmodelsonly.PleasecheckontheQUICKSTARTGUIDEifthisfunctionisactuallyavailableonyourmodel.
50mm
50mm
5 mm
max

Hotpoint UH8 F2D XI 2 Specifications

General

Brand	Hotpoint
Model	UH8 F2D XI 2
Category	Refrigerator
Language	English