Hotpoint UH8 F2D XI 2 User Manual

228


Thisfunctioncanbeusedtosaveenergy.Pleasefollow
the instructions contained in the Quick Start Guide to
activate/deactivatethefunction.Twosecondsafter
activationoftheSmartDisplay,thedisplaygoesoff.
Toadjustthetemperatureoruseotherfunctions,it
is necessary to activate the display by pressing any
button.Afterabout15secondswithoutperformingany
action,thedisplaygoesoffagain.Whenfunctionis
deactivatedthenormaldisplayisrestored.TheSmart
Displayisautomaticallydisabledafterapowerfailure.
Rememberthatthisfunctiondoesnotdisconnectthe
appliancefromthepowersupply,butonlyreducethe
energyconsumedbyexternaldisplay.
The declared appliance energy consumption
refers to operation with the Smart Display function
activated.Thisfunctionisavailableonlyonthemodel
withUserInterfaceonthedoor.

ThisfunctionturnsOn/Stand-bythefreezer
compartments.ToputtheproductinStand-by,press&
holdtheOn/Stand-bybutton for3seconds.When
theapplianceisinStand-by,thelightinsidethefreezer
compartmentdoesnotwork.Rememberthatthis
operation does not disconnect the appliance from the
powersupply.ToswitchtheapplianceOnagain,simply
presstheOn/Stand-Bybutton .

Afterapowerblackout,yourproductisdesignedto
automatically monitor the temperature in the freezer
whenelectricityisresupplied.Ifthetemperaturein
thefreezerrisesabovefreezinglevel,theBlackOut
indicator

turnson,theAlarmindicator

blinks
and the acoustical alarm sounds when electricity is
resupplied.
To reset the alarm press the Stop Alarm button

just
once.
IncaseofBlackOutAlarm,thefollowingactionsare
recommended:
• Ifthefoodinthefreezerisunfrozenbutstillcold,all
the food in the freezer should be eaten within the
next24hours.
• Ifthefoodinthefreezerisfrozen,thisindicatesthe
food was thawed and then refrozen when electricity
wasre-suppliedwhichdegradestaste,quality
andnutritionalvalueandalsocouldbeunsafe.It
is recommended to not consume the food but to
disposeoftheentirecontentofthefreezer.The
BlackOutAlarmisdesignedtoprovideguidanceon
food quality in the freezer in the event of electricity
blackout.Thissystemdoesnotguaranteefood
quality or safety and consumers are advised to use
their own judgment in evaluating food quality in
freezercompartment.

The acoustic alarm sounds and temperature indicator
(°C)blinks.Thealarmisactivatedwhen:
• The appliance is connected to the power supply
after prolonged disuse
• The freezer compartment temperature is too high
• The quantity of fresh foods loaded into the freezer
exceeds that indicated on the rating plate
• Thefreezerdoorhasbeenleftopenforalongtime.
To mute the alarm buzzer press Stop Alarm button

justonce.TheAlarmindicator

is automatically
turned-offassoonasthefreezercompartmentreaches
atemperaturebelow-10°Candthetemperatureset
indicator(°C)stopblinkingandshowsthechosen
setting.

The Alarm icon lights up blinking and the acoustic
alarmsounds.Thealarmisactivatedwhenthedoor
isleftopenformorethan2minutes.Todisengagethe
dooralarmclosethedoor,orpressonceStopAlarm
button tomutetheacousticalarm.
*Availableonselectedmodelsonly.PleasecheckontheQUICKSTARTGUIDEifthisfunctionisactuallyavailableonyourmodel.

Hotpoint UH8 F2D XI 2 Specifications

General

Brand	Hotpoint
Model	UH8 F2D XI 2
Category	Refrigerator
Language	English