HotSpring Beam User Manual

Page 18
FRESHWATER SALT SYSTEM (OPTIONAL)
If your spa has the FRESHWATER Salt
System installed you can navigate to the
screen as follows:
• Press the OPTIONS hard button on
the Control panel.
• Press the soft button next to
FRESHWATER Salt System.
(see FRESHWATER Salt System owner's manual for more information).
AUDIO (OPTIONAL)
If a wireless audio sound system is
installed, both the Home screen and
the Options screen will display the
Audio function.
To enter the Audio menu screen:
• Press the soft button next to Audio.
TO TURN AUDIO SYSTEM ON/OFF
• Press the soft button next to Audio OFF to turn the Sound System
on or off next to Audio ON. Audio must be ON to advance the audio
screens.
TO PAIR BLUETOOTH
1. Press the Function:SET soft
button 3 times to advance to the
Enter Setup screen. Press the
Enter Setup soft button to advance
to the Setup Source screen.
Bluetooth should be selected.
2. Press SETUP Source soft button
6 times from SETUP Source screen to advance to the PAIR screen.
3. Press PAIR soft button followed by pressing "connect" next to My
Spa BTXR on your device to pair. If you do not see this, another
device may already be connected (see To Disconnect Bluetooth on
following page).
After pairing, you will be ready to use your Bluetooth device. Only one
paired Bluetooth device will work at a time.
TO ADJUST VOLUME
• Press the soft button next to ▲ or
▼ to change the volume level.
• Press the Function:SET soft button
to advance to the Play/Pause
function screen.
Operating Instructions
TO PAUSE/PLAY (SONG)
• Press the soft button next to
PLAY/PAUSE (top right corner) to play or
pause music.
• Press the Function:PLAY/PAUSE
soft button to advance to the TRACK
function screen.
NOTE: Some audio sources will display
song title.
• Press the Function:SET soft button
to advance to the Forward function
screen.
TO CHANGE TRACK (SONG)
• Press the FORWARD or BACK soft
buttons to change the track (song).
• Press the Function:TRACK soft
button to advance to the SETUP
function screen.
• Press the Function:SET soft button to
advance to the Enter Setup screen.
TO GO TO SETUP MENU
• Press the ENTER SETUP soft button to
scroll to the SETUP SOURCE screen.
IMPORTANT: If the Function: SETUP
soft button is pressed, the screen will
advance back to the Volume screen.
Press the Back hard button to exit audio
screens if desired.
TO CHANGE AUDIO SOURCE
• This Source screen illustrates the current
audio source the spa is using.
• Press ▲ or ▼ soft buttons to change
the desired source: TV, AUX or
Bluetooth
®
.
To use the Bluetooth screen, your audio
Bluetooth device must be paired with the
spa.
TO ADJUST TREBLE
• Press SETUP SOURCE soft button to
advance to the SETUP Tone, Treble
screen.
• Press the soft button next to ▲ or ▼ to
change the Treble between -5 and +5.
• Press SETUP Tone,Treble soft
button to advance to the Tone, Bass
screen.
TO ADJUST BASS
• Press the soft button next to ▲ or ▼
to change the Bass between -5 and
+5.
• Press SETUP Tone,Bass
soft button to advance to the
BALANCE screen.
TO ADJUST BALANCE
• Press the soft button next to ▲ or ▼
to change the Balance between -5
and +5.
• Press SETUP Balance soft button
to advance to the Subwoofer
Volume screen.
TO ADJUST SUBWOOFER
• Press the soft button next to ▲ or
▼ to change the Subwoofer Volume
between 0 and 11.
• Press SETUP Subwoofer soft
button to advance to the Reset
screen.
TO DISCONNECT BLUETOOTH (RESET)
• Press the soft button next to Reset
to disconnect any device using the
spa music system so that another
paired device may be used. This is
also necessary when trying to pair
multiple devices because pairing is
NOT possible when another device
is connected to the music system.
• Press SETUP Music Status soft
button to advance to the Pair screen.
• To pair, press PAIR soft button
followed by pressing "connect"
next to My Spa BTXR on your
device.
IMPORTANT: Use the BACK hardbutton
to go back to the Function:SET screens
if desired.

HotSpring Beam Specifications

General

Brand	HotSpring
Model	Beam
Category	Hot Tub
Language	English