Need help?Do you have a question about the HotSpring Beam and is the answer not in the manual?
Essential safety guidelines and warnings for spa operation and user protection.
Various hazards and risks associated with spa use, including injury and health concerns.
Key information and recommendations for proper spa usage and maintenance.
Identifies and describes the various components and jets of the spa.
Key parameters and steps for balancing spa water chemistry.
How to adjust and set the spa water temperature.
How to activate and control the spa's jet systems.
Diagrams showing jet configurations for the Prism model with diverter settings.
Diagrams showing jet configurations for the Pulse model with diverter settings.
Diagrams showing jet configurations for the Flair model with diverter settings.
Diagrams showing jet configurations for the Flash model with diverter settings.
Diagrams showing jet configurations for the Beam 220V model.
Diagrams showing jet configurations for the Beam 115V model.
Step-by-step guide for draining and refilling the spa.
Wiring instructions and diagrams for 230V permanently connected spa models.
Safety and operational details for the 115V GFCI Beam model.
Wiring diagram and instructions for the 230V converted Beam model.
Troubleshooting steps for GFCI trips and high-limit thermostat issues.
Common operational problems and their probable causes and solutions.
Footprint, dimensions, capacity, and electrical requirements for Prism model.
Footprint, dimensions, capacity, and electrical requirements for Pulse model.
To Next Page
General