How do I fix scale buildup in my HotSpring Hot Tub?
Scale buildup in your HotSpring Hot Tub is usually due to high calcium content in the water, along with high total alkalinity and pH. To resolve this: * Adjust the total alkalinity and pH. * If scale removal is required, drain the spa, scrub off the scale, refill it, and balance the water.
What causes stains in my HotSpring HIGHLIFE GRANDEE and how to remove them?
Stains in your HotSpring Hot Tub can be caused by low total alkalinity or pH, or high iron or copper in the water. To address this: * Adjust the total alkalinity and/or pH. * Use a metal deposit inhibitor.
How do I remove organic buildup or scum from my HotSpring Hot Tub?
Organic buildup or a scum ring around your HotSpring Hot Tub is typically caused by a buildup of oils and dirt. Wipe off the scum with a clean rag. If it's severe, drain the spa, use a spa surface and tile cleaner to remove the scum, and then refill the spa.
What to do if my HotSpring Hot Tub has a musty odor?
A musty odor in your HotSpring Hot Tub indicates bacteria or algae growth. Shock the spa with sanitizer. If the problem is visible or persistent, drain, clean, and refill the spa.
What causes eye irritation in my HotSpring Hot Tub and how to prevent it?
Eye irritation in your HotSpring Hot Tub is often caused by low pH or low sanitizer levels. To fix this: * Adjust the pH. * Shock the spa with sanitizer and maintain the sanitizer level.
How do I fix algae growth in my HotSpring Hot Tub?
Algae growth in your HotSpring Hot Tub is often due to high pH or low sanitizer levels. You can: * Shock the spa with sanitizer and adjust the pH. * Shock the spa with sanitizer and maintain sanitizer level.
What causes skin irritation or rash from my HotSpring HIGHLIFE GRANDEE, and how to fix it?
Skin irritation or rash after using your HotSpring Hot Tub can be caused by unsanitary water or a free chlorine level above 5 ppm. To resolve this: * Shock the spa with sanitizer and maintain the sanitizer level. * Allow the free chlorine level to drop below 5 ppm before using the spa.
Why does my HotSpring HIGHLIFE GRANDEE have a chlorine odor?
A chlorine odor in your HotSpring Hot Tub usually indicates a high chloramine level or low pH. Try these solutions: * Shock the spa with sanitizer. * Adjust the pH to the recommended range.
What to do if my HotSpring HIGHLIFE GRANDEE Hot Tub water smells bad?
If your HotSpring Hot Tub water has an odor, it could be due to excessive organics, improper sanitization, or low pH. To address this: * Shock the spa with sanitizer. * Add sanitizer. * Adjust the pH to the recommended range.
General| Seating Capacity | 6-7 |
|---|---|
| Jets | 43 |
| Control System | IQ 2020 |
| Pump | 2 pumps |
| Filtration | Tri-X |
| Cabinet | Durable synthetic |
Crucial guidelines for safe spa operation, covering child safety and electrical hazards.
Discusses risks like hyperthermia, medication effects, and health conditions.
Advice on preventing skin burns and information on the safety sign.
Essential do's and don'ts for operating and maintaining the spa.
Overview of the spa's various jets, lighting, and control panel features.
Detailed explanation of different jet types and their functions.
Step-by-step guide for initial spa setup and filling.
Comprehensive steps for filling, chemical balancing, and initial operation.
Instructions for accessing and understanding the spa's equipment compartment.
Explains key water parameters like pH, alkalinity, hardness, and chlorine.
Safe practices for using spa chemicals and avoiding hazards.
Procedures for introducing chemicals and initial spa water treatment.
Guidance on sanitizer routines, shock treatments, and salt systems.
Details on optional products like chlorine, MPS, and silver ion purifiers.
Step-by-step guide for using Vanishing Act to soften spa water.
Maintenance for ozone system and instructions for spa care during absences.
Information on mineral deposit and foam inhibitors for water care.
Definitions of common terms used in spa water quality and maintenance.
Guide to operating the spa using the wireless remote control.
Explanation of the remote's default screen and its features.
How to adjust and lock the spa's water temperature using the remote.
Accessing and adjusting spa settings like lock, timer, and brightness.
Details on Temperature Lock, Spa Lock, Lights Timer, and Summer Timer.
How to operate the spa's various jet systems via the control panel.
Accessing and operating the optional FRESHWATER Salt System.
Pairing and controlling music playback via Bluetooth.
Using the docking tray buttons for basic jet and light operation.
Diagram showing jet system layouts and configurations for the GrandeE model.
Diagram showing jet system layouts and configurations for the Envoy model.
Diagram showing jet system layouts and configurations for the Vanguard model.
Diagram showing jet system layouts and configurations for the Aria model.
Diagram showing jet system layouts and configurations for the Sovereign model.
Diagram showing jet system layouts and configurations for the Triumph model.
Diagram showing jet system layouts and configurations for the Prodigy model.
Diagram showing jet system layouts and configurations for the Jetsetter LX model.
Diagram showing jet system layouts and configurations for the Jetsetter model.
Procedures for draining and refilling the spa, including cold water refill notes.
Steps to prevent freezing damage and prepare the spa for winter storage.
Instructions for cleaning and replacing filter cartridges for optimal performance.
Guidance on cleaning and maintaining the spa's pillows.
Cleaning and maintenance of the spa shell and cabinet surfaces.
Instructions for cleaning, conditioning, and caring for the spa cover.
How to operate the cover lifter system for opening and closing the cover.
Essential steps for choosing and preparing the spa installation location.
Requirements for outdoor spa placement on patios or ground.
Important factors for installing a spa on an elevated deck.
Special requirements for installing a spa indoors or in a basement.
Options for spa foundations, including concrete slabs and alternatives.
Preparing the site for proper spa leveling and drainage.
Step-by-step guide for leveling the spa using shims and blocks.
Information on spa dimensions and clearance needed for delivery.
Guidance on preparing the ground surface for spa installation.
Provides detailed dimensions and diagrams for each spa model.
Introduction to service, troubleshooting, and warranty considerations.
Diagnosing issues with RCDs and high-limit thermostats.
Information on the No-Fault heater and integrated pressure switch.
Troubleshooting the Silent Flo circulation pump's thermal cut-off.
Additional service information regarding pumps and sensors.
Conditions that void the warranty and a guide to common spa problems.
Step-by-step instructions for removing and replacing the front door panel.
Comprehensive list of specifications for all Hot Spring spa models.
To Next Page
