Why does my HotSpring Hot Tub have a water odor?
If you notice a water odor in your HotSpring Hot Tub, it could be due to excessive organics in the water or improper sanitization; in either case, shock the spa with sanitizer or add sanitizer. Another possibility is low pH, which can be resolved by adjusting the pH to the recommended range.
Why is my HotSpring HOT SPOT TX water cloudy?
Cloudy water in your HotSpring Hot Tub can result from several factors. It may be caused by dirty filters, so cleaning them is a good first step. Excessive oils or organic matter can also be the culprit, in which case you should shock the spa with sanitizer. Other potential causes include improper sanitization (add sanitizer), suspended particles or organic matter (adjust pH and/or alkalinity), or overused water (drain and refill the spa).
Comprehensive guidelines for safe spa operation, covering children, electricity, and general risks.
Measures to prevent unauthorized access and ensure child safety around the spa.
Critical electrical safety protocols, including grounding, GFCI, and wiring.
Covers potential dangers like injury, medication side effects, health issues, and hyperthermia.
Guidelines for maintaining water quality, chemical balance, and sanitation.
Guidance on selecting a location and preparing the site for proper spa installation.
Specific recommendations for installing the spa outdoors on patios or decks.
Requirements and considerations for installing the spa on a deck.
Special requirements for indoor installations, including ventilation and flooring.
Instructions on how to properly level the spa for stability and installation.
Information on choosing the correct voltage and amperage for your spa model.
Specific wiring instructions for 115-volt installations.
Specific wiring instructions for 230-volt installations.
Conversion details for 115V, 30 amp service for SX and TX models.
Conversion details for 230V, 30/50 amp service for SX and TX models.
Detailed specifications and overhead view of the Tempo spa model.
Detailed specifications and overhead view of the Relay spa model.
Detailed specifications and overhead view of the Rhythm spa model.
Detailed specifications and overhead view of the SX spa model.
Detailed specifications and overhead view of the TX spa model.
Step-by-step guide for filling, priming, and starting up the spa.
Explanation of how the heating and jet pump systems operate.
Information on GFCI, heater high-limit, pressure switch, and thermostat functions.
How to use the control panel for Tempo, Relay, and Rhythm models.
How to use the control panel for SX and TX models.
How to use Temperature Lock and Spa Lock features to secure the control panel.
Diagram and description of jets for the Tempo model, divided by pump.
Diagram and description of jets for the Relay model, divided by pump.
Diagram and description of jets for the Rhythm model, divided by pump.
Diagram and description of jets for the SX model.
Diagram and description of jets for the TX model.
Overview of the three fundamental areas of spa water maintenance.
Guidance on testing spa water for Total Alkalinity, Calcium Hardness, pH, and Sanitizer.
Essential safety precautions when handling and using spa chemicals.
Instructions on the proper method for adding chemicals to the spa water.
A step-by-step program for maintaining spa water quality.
Guidance on achieving and maintaining the ideal pH level for spa water.
How to clean and maintain the spa filter cartridge for optimal performance.
Step-by-step instructions for removing and cleaning the filter cartridge.
Recommended cleaning agents and methods for the spa's acrylic shell.
Instructions for cleaning and conditioning the spa's vinyl cover.
Procedures for safely draining the spa water.
Detailed instructions for winterizing the spa for severe cold weather.
Troubleshooting steps for GFCI and high-limit thermostat issues.
Conditions that will void the spa's limited warranty.
Tips for diagnosing and resolving common spa problems.
Common operational problems and their solutions.
Common water chemistry issues and how to resolve them.
To Next Page
General