HotSpring Jetsetter JJE User Manual

48 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

HIGHLIFE

®

COLLECTION

Grandee™

•

Envoy™

•

Aria™

•

Vanguard™

•

Sovereign™

•

Prodigy™

•

Jetsetter™

•

Triumph™

OWNER’S MANUAL 5 0HZ

Table of Contents

Questions and Answers:

P
pittskimAug 9, 2025
What to do if my HotSpring Hot Tub does not heat but jets and light operate?
- B
  Brett Henry PhDAug 9, 2025
  If your HotSpring Hot Tub's jets and light are working, but the spa is not heating, it could be due to: * An open integrated pressure switch: Check for clogged filters. The integrated pressure switch will reset when the flow of water through the heater has been restored. Call for service if the heater trips frequently. * The circulation pump thermal cut-off tripped: Check for clogged filters or air locks in plumbing. Disconnect power to the spa and allow the circulation pump to cool. The circulation pump thermal cut-off will reset when the pump has cooled and power is reapplied. Call for service if the circulation pump thermal cut-off trips frequently.
K
Kim FullerAug 15, 2025
What to do if my HotSpring Jetsetter JJE Hot Tub is completely inoperative?
- J
  John MccallAug 15, 2025
  If your HotSpring Hot Tub is completely inoperative, there are several potential causes: * A power failure: Check your power source. * The GFCI tripped: Reset the GFCI. If it will not reset, call for service. * The heater high-limit thermostat tripped: Disconnect power for at least thirty seconds to reset the heater high limit. If it continues to trip, check for clogged filters. If it still continues, call for service. * The spa lock is activated: Deactivate the spa lock.
C
Carol PollardAug 21, 2025
Why are the jets weak or surging in my HotSpring Hot Tub?
- B
  Barbara HughesAug 21, 2025
  Weak or surging jets in your HotSpring Hot Tub can be due to a few reasons: * The spa water level is too low: Add water. * The filters are clogged: Clean the filters. * The COMFORT CONTROL lever is closed: Open the COMFORT CONTROL lever.
J
John MuellerAug 27, 2025
How to fix a MOTO-MASSAGE DX jet that is inoperative or erratic in my HotSpring Jetsetter JJE Hot Tub?
- B
  Billy BuckAug 27, 2025
  An inoperative or erratic MOTO-MASSAGE DX jet in your HotSpring Hot Tub can be caused by: * Closed COMFORT CONTROL valves: Open the COMFORT CONTROL levers. * Clogged filters: Clean the filters.
J
jacquelinegarciaSep 1, 2025
What to do if the light is inoperative in my HotSpring Jetsetter JJE Hot Tub?
- T
  Travis CopelandSep 1, 2025
  If the light in your HotSpring Hot Tub is inoperative, it could be due to: * Spa lock activated: Deactivate spa lock. * Faulty light wiring or assembly: Replace the light assembly.

HotSpring Jetsetter JJE Specifications

General

Brand	HotSpring
Model	Jetsetter JJE
Category	Hot Tub
Language	English

Summary

SAFETY INFORMATION

IMPORTANT SAFETY INSTRUCTIONS

Essential safety precautions and warnings for spa operation and use.

RISK OF CHILD DROWNING

Measures to prevent child access and ensure supervision in and around the spa.

RISK OF ELECTROCUTION

Precautions to avoid electrical shock hazards when using the spa and its components.

HEALTH PROBLEMS AFFECTED BY SPA USE

Health conditions and advice for spa users before use, including pregnancy and medical history.

UNCLEAN WATER

Guidelines for maintaining clean and sanitized spa water with recommended chemical levels.

RISK OF HYPERTHERMIA

Warnings and precautions related to high water temperatures and their health effects.

RISK OF SKIN BURNS

Advice on preventing skin burns from hot spa water, including temperature testing.

IMPORTANT SPA INSTRUCTIONS

Key instructions for safe and proper spa operation, maintenance, and chemical use.

GETTING STARTED

SPA FEATURES

Overview of the various jets, controls, lighting, and other features of the spa.

QUICK START-UP INSTRUCTIONS

Step-by-step guide for initial spa setup, filling, and system checks.

OPERATING INSTRUCTIONS

CONTROL PANEL

Overview of the spa's touchscreen control panel, its layout, and basic functions.

HOME SCREEN

Description of the default spa screen, temperature display, and status indicators.

TEMPERATURE CONTROL

SETTINGS SCREENS

SPA CARE AND MAINTENANCE

DRAIN & REFILL INSTRUCTIONS

Procedures for draining and refilling the spa water, including important temperature guidelines.

PREVENTION OF FREEZING

Measures to prevent spa damage from freezing temperatures and improve energy efficiency.

WINTERIZING YOUR SPA

Steps for preparing the spa for extended periods of non-use to prevent freeze damage.

FILTER SYSTEM

FILTER CARTRIDGES REMOVAL & CLEANING

ELECTRICAL REQUIREMENTS

INSTALLATION

Important considerations for safe and compliant electrical installation of the spa.

CONDUIT INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS

SITE PREPARATION

Guidance on selecting and preparing the spa installation site for structural integrity.

OUTDOOR AND PATIO INSTALLATION

SPA LEVELING INSTRUCTIONS

GROUND PREPARATION

SERVICE INFORMATION

GENERAL INFORMATION

GFCI AND HIGHLIMIT THERMOSTAT

Troubleshooting common issues with GFCI, high-limit thermostat, and power indicators.

NO-FAULT HEATER AND INTEGRATED PRESSURE SWITCH

GENERAL OPERATION TROUBLESHOOTING GUIDE

LOGO LIGHT TROUBLESHOOTING GUIDE

SPA WATER MAINTENANCE TROUBLESHOOTING GUIDE

Related product manuals

HotSpring Jetsetter JJ

HotSpring Jetsetter

HotSpring JETSETTER LX

HotSpring HIGHLIFE JETSETTER LX

Preview: HotSpring Vista

HotSpring Vista

HotSpring Vanguard

Preview: HotSpring Limelight

HotSpring Limelight

Preview: HotSpring HOT SPOT Tempo

HotSpring HOT SPOT Tempo

Preview: HotSpring HOT SPOT Relay

HotSpring HOT SPOT Relay

HotSpring HOT SPOT Rhythm

Preview: HotSpring LIMELIGHT Prism

HotSpring LIMELIGHT Prism