Hoval TopVent TH-6C - Use; Intended Use; User Group

1 Use
1.1 Intended use
TopVent
®
TH, TC, THC recirculation units
These TopVent
®
units are recirculation units for heating and cooling spaces
up to 25 m in height with central heat and cold supply. They have the following
functions:
■ Heating (with connection to a hot water supply)
■ Cooling (with connection to a water chiller) (only TC, THC)
■ Recirculation operation
■ Air distribution and destratication with adjustable Air-Injector
■ Air ltration (option)
TopVent
®
MH, MC, MHC supply air units
These TopVent
®
units are supply air units for ventilating, heating and cooling
spaces up to 25 m in height with central heat and cold supply. They have the
following functions:
■ Heating (with connection to a hot water supply)
■ Cooling (with connection to a water chiller) (only MC, MHC)
■ Fresh air supply
■ Mixed air operation
■ Recirculation operation
■ Air distribution and destratication with adjustable Air-Injector
■ Air ltration
The TopVent
®
units comply with all the requirements of the Ecodesign Directive
2009/125/EC relating to environmentally friendly design of ventilation systems.
They are systems of the 'fan coil unit' type.
Intended use also includes compliance with the operating instructions. Any usage
over and above this use is considered to be not as intended. The manufacturer
can accept no liability for damage resulting from improper use.
1.2 User group
The units are only allowed to be installed, operated and maintained by authorised
and instructed personnel who are well acquainted with the units and are informed
about possible dangers.
The operating instructions are for operating engineers as well as specialists in
building, heating and ventilation technology.
2 3
TopVent
®
TH
|
TC
|
THC
|
MH
|
MC
|
MHC
Operating instructions
Use
4 218 828-en-01