EasyManua.ls Logo

Hover-1 E-TRACK - Inflating the Tires; Turning Your Device On;Off; Accelerate;Brake

Hover-1 E-TRACK
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INFLATING THE TIRES
TURNING YOUR DEVICE ON/OFF
To power the device on or off, use the power switch indicated in the
“HOVER-1 E-TRACK DIAGRAM” on page 5.
ACCELERATE/BRAKE
To accelarate forward, twist the throttle on the right handlebar.
To brake, disengage the throttle and squeeze the brake handle on
the left handlebar.
Your E-Track dirt bike comes equipped with 12 inch air-filled tires. It is
important you keep the tire pressure at the recommended psi levels
(65 psi).
Regularly check the tire pressure of your tires. If air is needed, attach
the included air pump to the input valve on each tire and pump the
tires until they reach 65 psi. Do not exceed 65 psi.
CONTROLS
8

Related product manuals