PARTS LIST
ASSEMBLING THE E-TRACK
ASSEMBLE THE HANDLEBARS
1. Attach the 4 included washers to the large screws (A). Align the clamps (B & C) with
the handlebar grooves.
2. Align the holes of the bottom clamps with the holes in the front fork (D). Insert all of the
screws into all of the clamps and use the larger hex key to fully tighten all of the screws.
3. Ensure the handlebars are secured before riding.
A
C
B
E
D
C
A
B
A. E-Track Dirt Bike Frame
B. Handlebar Assembly
C. Charger + Charging Cable
D. Wrench + Hex Key/Screwdriver Tool
E. Air Pump
D
6
To Next Page
Loading...
