If you have questions or concerns about any of these steps, please feel free to contact our Customer Service
Team at www.hover-1.com. Someone will be in touch to walk you through these steps.
Carefully follow the steps shown on the following pages for installing the Hover-1 Go-Kart onto your electric
scooter. Read the remainder of this manual before riding your Hover-1 Go-Kart.
Your Hover-1 Go-Kart should be completely assembled prior to installing it onto your electric scooter. Please
refer to the “Assembling your Hover-1 Go-Kart” section for assembling procedures.
1. Place the pedal mounts onto the footpad sensors of your self-balancing scooter with the front wheel
facing forward. Ensure the pedal mounts are centered on the footpad sensors of your scooter as much
as possible.
INSTALLING YOUR HOVER-1 GO-KART
SPACE EVENLY
10
To Next Page
Loading...
