Hover-1 HIGHLANDER - Before Riding; Pre-Operation Checks; Pre-Ride Checklist

Before each use, the EScooter operator shall perform the
pre-operation checks as speciied below:
• The area that the unit is to be operated in is safe and suitable for safe
operation.
• The braking system is functioning properly.
• All safety lables are in place and understood by the operator.
• Any and all axle guards, chain guards, or other covers and guards
supplied by the manufacturer are in place and in serviceable condition.
• The tires are in good condition and have suicient tread remaining.
It is important that you fully understand all the functions of your Highlander
EScooter. If these functions are not used correctly, you will not have full
control of your Highlander.
Practice using the Highlander at slower speeds in a lat, open area before
taking it out into public areas.
PRE-RIDE CHECKLIST
Ensure that your Highlander is in proper working order each time you ride.
If a part of the Highlander does not function correctly, please contact our
Customer Support Center.
• Ensure the battery is fully charged before riding your EScooter.
• Please wear all appropriate safety gear before operating your EScooter.
• Make sure to wear comfortable clothes and lat, closed-toe shoes when
operating your EScooter.
BEFORE RIDING
WARNING
Any EScooter that does not work properly
can cause you to lose control and fall. Do
not ride an EScooter with a part that is
damaged. Replace the damaged part
before riding.
21