PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY
ATTACHING THE HANDLEBAR KIT
Attach the handle bar kit by placing it into the steering column, align
the front and back screw holes, and tighten the 4 screws into place.
Some parts of your Hover-1 Jive can injure you if mishandled.
Moving and folding parts can cut skin. Clamps and pivoting parts
such as brake levers can pinch. When folding and unfolding your
Hover-1 Jive, Please watch for pinch points where possible injury may
be sustained. Do not leave your hand in these areas during folding or
unfolding.
PREPARING YOUR SCOOTER
PINCH POINTS
18
To Next Page
Loading...
