Hover-1 JIVE - Folding and Unfolding Steps; High Speed and Cruise Control; Kick to Start Mechanism

FOLDING & UNFOLDING YOUR JIVE SCOOTER.
To unfold your Jive, press down on the folding clip and pull the steering
column up. Raise the safety lock up and push it into place to secure
the steering column. You will hear a “click”, indicating the steering
column is locked. Ensure the steering column is secured in place.
To active high speed mode, ensure the Jive is powered on and not in
motion. Press the power button twice, the high speed mode indicator
should light up on your display to indicate it is activated.
To activate the cruise function: When the product reaches a constant
speed, press and hold the throttle down for 6 seconds, you will hear a
beep confirming cruise mode is activated.
To deactivate this function press the throttle down once or squeeze
the brake handle .
For safety reasons, the scooter will not accelerate unless it is already
moving at leat 1.8mph (3km/h). You must first kick off the ground and
then press the throttle in order to ride the scooter.
KICK TO START
FOLDING & UNFOLDING
HIGH SPEED MODE
CRUISE CONTROL
FOLDING
HINGE
R
A
I
S
E
O
R
L
O
W
E
R
Release folding clip
to fold steering column
19