Hover-1 KART - Riding Your Hover-1 Kart

RIDING YOUR HOVER-1 KART
Ensure your Hover-1 Kart is fully assembled and correctly installed onto your scooter with all straps and screws
secured in place. Ensure your scooter is properly calibrated as well. Failure to do so may result in serious bodily
harm or death and damage to the unit and your scooter.
After reviewing the pre-ride checklist, follow the steps below to begin riding your Hover-1 Kart.
1. Turn on your scooter.
2. Sit comfortably in the Hover-1 Kart seat.
3. Place your feet onto the foot rests.
4. Firmly grip both handle bars and slowly push them downward simultaneously to move forward.
5. When riding, slowly pull both handle bars upwards simultaneously to brake.
6. To reverse, slowly pull both handle bars upwards simultaneously.
7. To turn right, push the right handle bar down while holding the left handle bar in neutral position.
8. To turn left, push the left handle bar down while holding the right handle bar in neutral position.
18