Please visit
www.hover-1.eu/troubleshoot
to request missing
or defective parts
2. Locate the provided 2pcs 8*40 Screw, 2pcs 8mm Nut, and Flag Holder. Attach the left and right handle bars to
the seat frame as shown below, positionFlag holder on either side and fasten the handle bars and Flag holder
with Screws and Nuts.
3. Insert the frame into the seat frame. Adjust the foot rest extension and the seat frame to your preferred length.
Secure the frame in place using the 2 lockers.
7
To Next Page
Loading...
