BLUETOOTH SPEAKER
The Max has a powerful built-in wireless speakers so you can play
your music while riding.
PAIRING THE SPEAKER
I ) Turn on your Max and the speakers will "Ping" to announce that it's
waiting for a Bluetooth@ connection. Thiswill indicate your Max
speaker is now in pairing mode.
2) Place the Max and the Bluetooth0 device to which you would like
to pair it within the operating distance. We recommend keeping the
two devices no further than 3 feet apart during pairing.
3) Ensure Bluetooth@ is enabled on your phone or music device. Refer
to manufacturer's instructions for how to enable Bluetooth0 on your
4) Once you have activated Bluetooth0 on your device, select the
option "H I -MAX" from the list of available Bluetooth@ devices.
5) If required, enter the PIN code 1'000000' and confirm the entry.
6) The Max will say "Paired" when SUCCeSSfUIIypaired.
7) Please note, pairing mode on the Max will last for two minutes. If no
devices are paired after two minutes, the Max speaker will
automatically return to standby mode.
8) If pairing is UnscceSSfUI, turn off the Max first and re-pair following
the aforementioned steps.
9) If your smart phone isout of range, or the battery is low on your
Max, your speaker may disconnect from your smart device, and the
Max will say "Disconnected." To reconnect, follow the
aforementioned steps, or recharge your scooter.
NOTE: Once you have paired the Max speaker with a device, the
speaker will remember this device and will pair automatically when
the device's Bluetooth@ is activated and in range. You do not need
to re-pair any previously connected devices.
Your scooter can pair up to two multi-point devices. YOU can
reconnect a previously paired device without going through the
pairing or PIN process on up to two devices.
LISTENING TO MUSIC
Once the Max Bluetooth speaker is paired to your device, you can
stream music wirelessly through it. Only one speaker will play music as
the other speaker is strictly for safety alerts from your Hover-I . Select
the track you wish to listen to on your device to listen via the speaker.
All volume and track controls will be made using your music device.
Should you encounter any problems while streaming, please refer to
your device's user manual.
7
To Next Page
Loading...
