CHARGING THE DEVICE
• Ensure that the charging port is clean and dry.
• Make sure that there is no dust, debris, or dirt inside the port.
• Plug the charger into a grounded wall outlet.
• Connect the cable with the power supply (100V-240V; 50 Hz/60
Hz).
• Align and connect the charging cable into the charging port of
the Neo X (DO NOT FORCE OR BEND THE CHARGING CABLE AS IT
MAY CAUSE THE PRONGS TO BEND OR BREAK).
• The charging indicator light on the charger itself should change to
red, indicating that your E-Scooter is now being charged.
• When the red indicator light on your charger changes to green,
your E-Scooter is fully charged.
• After fully charging your E-Scooter, unplug the charger from your
device and from the wall outlet.
• If the E-Scooter is not used for an extended period of time, you may
need to recharge the battery each month to preserve the battery
life.
Only use the included charging
cable and charger to charge your
Neo X. Using any other unauthorized
charger may damage your Neo X.
CAUTION
CHARGING YOUR NEO X
17
To Next Page
