PREPARING YOUR SCOOTER
PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY
ATTACHING THE HANDLEBAR KIT
Attach the handle bar kit by placing it into the steering column, align
the front and back screw holes, and tighten the 4 screws into place.
uan
11/1/1
PINCH POINTS
Some parts of your Hover-I PIONEER can injure you if mishandled.
Moving and folding parts can cut skin. Clamps and pivoting parts
such as brake levers can pinch. When folding and unfolding your
Hover-I PIONEER, Please watch for pinch points where possible injury
may be sustained. Do not leave your hand in these areas during
folding or unfolding.
18
To Next Page
Loading...
