Quick Start
Q-5
Scan & Fax
1 Place the document to be sent face down in the document tray.
2Press Scan & Fax.
3Dial the number by using one of these methods:
• Entering the number and pressing Start/Copy.
•Pressing a One Touch button.
•Pressing the Speed Dial button, entering a speed dial code and
pressing Start/Copy. See “Using Speed Dialing and Broadcasting”
on page 17.
Note:
One touch buttons and speed dial codes must have been
previously programmed.
Receiving a fax
How faxes are received depends on how the Answer Mode is set.
TEL Answer Mode
If the Answer Mode is set to TEL, you must manually receive faxes.
1 Answer the telephone.
2 If you hear fax tones, press the Start/Copy button.
3 Once you hear fax tones from both machines (this may take several
seconds), you may hang up the telephone.
FAX or TAM/FAX Answer Mode
If the Answer Mode is set to FAX or TAM/FAX, the fax machine will answer
the telephone, automatically detect fax tones, and receive a fax.
Tip!
If you answer the telephone and hear fax tones, press the Start/Copy
button to receive the fax.
To Next Page
Loading...
