Display assembly
This section describes removing the display assembly and disassembling display subcomponents.
Description Spare part number
Raw display panel for use in HP Notebook PC models (includes insulator screws)
FHD 860573-001
HD 860574-001
Raw display panel for use in HP 245 G5 Notebook PC models (includes insulator screws) 864838-001
Antenna (includes insulator screws)
Single antenna 813485-001
Dual antennas 859127-001
Display bezel (includes insulator screws) 858073-001
Display cable (includes display panel cable and webcam/microphone cable; includes insulator screws)
For use with FHD displays (HP Notebook PC only) 858074-001
For use with HD displays 858075-001
Display enclosure for use in HP Notebook PC models (includes insulator screws)
Black models 858065-001
Red models 858068-001
White silver models 858067-001
Turbo silver models 858066-001
Blue models 858070-001
Display enclosure for use in HP 245 G5 Notebook PC models (includes insulator screws) 860456-001
Hinges (left and right) (includes insulator screws) 858076-001
Hinge (top) 858702-001
Webcam/microphone module (includes insulator screws)
VGA 860575-001
HD 860576-001
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 26).
Component replacement procedures 53
To Next Page
Loading...
Need help?
General
