6
Item Requirements Result
Rack-mounting
requirements
• Install the switch in an open rack if possible. If you install
the switch in a closed cabinet, make sure that the cabinet
is equipped with a good ventilation system.
• The rack is sturdy enough to support the weight of the
switch and installation accessories.
• The size of the rack is appropriate for the switch.
• The front and rear of the rack are at least 0.8 m (31.50 in)
away from walls or other devices.
Safety
precautions
• The switch is far away from any moist area and heat source.
• You have located the emergency power switch in the equipment room.
Accessories Accessories shipped with the switch
Reference
• Documents shipped with the switch.
• Online documents.
To Next Page
Loading...
