HP 16501A - 10 Mainframe Commands Beeper

BEEPer
Command :BEEPer [{ON|1}|{OFF|0}]
The BEEPer command sets the beeper mode, which turns the beeper sound
of the instrument on and off. When BEEPer is sent with no argument, the
beeper will be sounded without affecting the current mode.
Example OUTPUT XXX;":BEEPER"
OUTPUT XXX;":BEEP ON"
Query :BEEPer?
The BEEPer? query returns the mode currently selected.
Returned Format
[:BEEPer] {1|0}<NL>
Example OUTPUT XXX;":BEEPER?"
Mainframe Commands
BEEPer
10–6