HP 16z-ad000 Maintenance And Service Guide

Before removing thekeyboard, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 41).
2. Remove the bottom cover (see Bottom cover on page 41).
3. Remove the battery (see Battery on page 43).
4. Remove the fan (see Fan on page 56).
5. Remove the heat sink (see Heat sink assembly on page 57).
6. Remove the system board (see System board on page 59).
Remove the keyboard:
1. Remove the following components from the keyboard:
(1) Conductive tape
(2) Gaskets
(3) Mylar
(4) Sponge
2. Remove the following components from the keyboard:
(1) Conductive tape
Keyboard 63

HP 16z-ad000 Specifications

General

Brand	HP
Model	16z-ad000
Category	Laptop
Language	English