❍ Moving the print server to another IP network
● LPD (line printer daemon) printing
● FTP printing [for 310x only, not for 175x]
● IPP printing [for 310x only, not for 175x]
● IPX/SPX (In most cases, parameters do not need to be set on the print server.)
Note: The print server supports both IPX/SPX direct mode (peer-to-peer) and [for 310x only,
not for 175x] IPX/SPX in client/server mode with Novell NetWare servers.
● DLC/LLC: [for 310x only, not for 175x] Can be enabled or disabled; otherwise there are no
parameters to set on the Jetdirect module.
● AppleTalk: Printer Name and Printer Zone parameters can be set up using the HP LaserJet
Utility for MacOS.
● SNMP: (Simple Network Management Protocol) used with your configuration and
management tools. The HP-Jetdirect-specific MIB (Management Information Base) is MIB-II
compliant; it is available upon request to HP support.
©2000, 2001, 2002 Hewlett-Packard Company
To Next Page
Loading...